Wire bending, performed both manually and with the help of various tools and special equipment, allows you to give products from this material a different configuration. During the bending process, the inner layer of the wire is subjected to compression, and the outer layer is stretched. Wire bending machines, which today are presented in a wide variety of models, are very popular, as bent wire products are actively used to solve various industrial and household tasks.
The simplest wire bender
In order to perform bending operations at home without any problems, it is best to choose a wire made of soft materials. It is possible to carry out simple bending of a stiffer wire, if necessary, using conventional plumbing tools:
Simple tricks for manual wire bending
If it is necessary to make a product of complex configuration from wire using the bending method, it is better to first draw it on paper and periodically check with the sketch. To form the simplest figures, such a sketch can not be used. For example, if you need to create a bent product of a rectangular shape, you can do this as follows:
As a result of such a simple procedure, a bend at a right angle is formed on the surface of the wire.
For the manufacture of a large number of the same type of wire parts, templates and home-made fixtures are used.
If you are going to manually bend the wire, you must adhere to a number of recommendations that will allow you to perform such a procedure without harm to your own health.
It is possible to perform wire bending using improvised means only in small volumes, since such a procedure is quite laborious. In addition, this operation can only be used to create products of the simplest configuration.
To manufacture various products in large volumes, including those with complex shapes, allows a specialized machine for bending wire.
For the manufacture of a large number of bent products from wire, various methods can be used, for the implementation of each of which special equipment is used. The most common and economical is the bay bending method.
Bending according to this technology takes place in several stages.
The use of this technology allows you to fully automate the bending process and thus achieve its high productivity.
Budget wire bending machine
A wire bending machine can also look like a fixed template, around which the wire is rolled using movable pressure rollers. Using such devices, it is possible to form bends of even the smallest radius on the surface of the wire, the value of which is comparable to the outer diameter of the workpiece. In this case, the configuration of the product formed on such a machine can be quite complex.
Adjustable stops and variable levers of this template allow you to create many combinations of wire bends
The wire bending machine can also work on the principle of pushing the workpiece through a system of rollers. When using such equipment, the end of the wire is connected to a special wire, which pulls the product through the working bodies of the machine. A wire bending machine of this type, due to the peculiarities of its design, makes it possible to manufacture products that differ even in very complex shapes.
When aligning the wire, a wire bending machine is also used, which in this case is used for straightening. The correct frames or two-plane correct blocks can act as working bodies of such equipment. At the same time, rotating regular frames are distinguished by higher efficiency, which is why they are used in cases where the alignment of the wire surface must be performed as smoothly and efficiently as possible.
The simplest type of professional equipment used for wire bending are machines with one console. Meanwhile, on such devices it is possible to produce only products of a simple geometric shape, the development length of which does not exceed 1000 mm.
More complex products with a development length of more than 1000 mm make it possible to create two-cantilever equipment, on which the workpiece is deformed simultaneously from both ends. On such a machine, you can make products with many complex bends.
The most complex wire products allow you to create 3D machines on which bending can be performed simultaneously in three dimensions. The machines of this category are endowed with such unique functions by a rotary bending console, all movements of which are controlled by an electronic automated system. Despite all the advantages of processing on such equipment, it is quite expensive, so these machines are used in exceptional cases.
met-all.org
Wire bending is one of the ways to give it a new shape using manual or mechanical action using special equipment.
The bending itself is due to the compression of the inner layer, whereby the outer layer can be stretched and folded. Such technological works are in great demand, as well as equipment for manual bending.
You can create products from bent wire with your own hands.
In this case, it is desirable to choose softer plastic materials for the process, so that the wire can easily bend, and do-it-yourself work does not create difficulties.
If the wire is rigid and has a large diameter, then for its manual processing it is necessary to use certain tools:
Before you start manually bending the material for the rings, it is better to create a certain template on paper and periodically check it during work. Simple shapes can be made without the participation of templates.
For example, to create a conventional rectangular clamp, it is enough to first clamp a part of the wire with a metal vise, and bend at a right angle on the remaining piece with pliers or a hammer.
When doing manual work on bending wire with your own hands, you should follow certain safety rules that can protect your hands from possible injuries:
Safety rules will protect your hands, but the DIY bending process itself is still quite complicated and time consuming. You can bend products manually only if you have certain experience and knowledge.
Special equipment helps to bend the wire in large volumes. Let's study it in more detail.
If we talk about bending wire on a large scale (in production or a specialized plant), then various methods are used for its plastic deformation.
One of the most common and economical is the bay method of processing.
In this case, wire rings are wound on coils, and then they are fed to two-plane roller machines that align the wire.
After that, the material is processed on bending equipment (the necessary shape is created), at the end the wire is cut off, and the whole cycle of work is repeated again.
At the same time, all work is fully automated, which allows you to save time and money and use the device to create a simple curved structure with a sweep length of about 1000 mm.
For do-it-yourself wire-running, there are special devices that consist of fixed templates of certain curvature radii (the radius can be either one or several).
The material is rolled around the created template using pressure rollers.
Basically, this technology is used to create bent products that have a small bend radius (about the same as the diameter of the wire).
The method of pushing the wire is similar to the way the 3-roll equipment works on a roll forming and spring winding machine.
The material is pushed into the fixture using a special wire, then it is pressed against various rollers, which makes it possible to change the bending parameters and make transitions to different radii.
This device allows you to bend various structures with a complex configuration and large bending radii on the reamer - from 1000 mm or more.
You can align the wire using straightening equipment or a special device. This equipment includes units consisting of rotating straightening frames or two-plane straightening blocks.
In this case, rotating frames are preferable, as they allow you to align the material more smoothly.
If only the simplest devices (vice, pliers) are used for bending wire on their own, then professional machines are put into action for mass industrial processing of the material (for example, for the production of key rings, or springs for handles).
A wire bending machine with one bending console is one of the simplest and makes it possible to create bent products of a simple shape. The length of the reamer in this case should not exceed 1000 mm.
Two-console machines can work with a reaming length of more than 1000 mm.
The material is cut into the required pieces, then it is deformed from both ends simultaneously.
Such equipment allows you to create products with a large number of bends. Machines with only one console can no longer perform this work.
Also on double-console machines, you can make figures with closed bends.
Wire bending on so-called 3D machines is becoming more and more popular these days.
It is possible to make volumetric spatial bending using a rotary bending console, which is controlled by an automated system.
Unfortunately, such processing of the material is quite expensive, so basically the parts are created using simple flat bending, and then, if necessary, automatic welding of individual parts is carried out.
But due to welding seams, products become more fragile and short-lived, so their cost is relatively budgetary.
rezhemmetall.ru
It is difficult to say where wire products, which are a metal thread or a thin rod, have not been used today. Wire bending made it possible to give products any desired shape. Both with the help of both hand tools and mechanical influences on special equipment.
From a physical point of view, the process of bending a wire consists in the simultaneous compression of the inner and stretching of the outer layers of the metal of the wire. The process can also be accompanied by a longitudinal displacement of these layers, if twisting occurs. This technology of working with metal wire is widely used both in many industries and in jewelry.
There are several main ways to give the metal wire the necessary shape of the finished product, so we can distinguish:
Mechanical machines for the mass production of parts and finished products from metal wire are widely used in industrial production. Depending on the method of technology for shaping the finished product, there are:
The development of machine tools has made it possible to produce wire bending machines with one or two bending consoles. They can produce finished products not only in flat 2D shapes, but also in spatial 3D models. The transfer of control of production processes to an industrial computer made it possible for the CNC machine tool to ensure the rotation of bending consoles in three-dimensional space in any given sequence.
Wire bending by CNC machines not only allows for higher productivity, but also for the production of products of different shapes just by changing the production program.
In any household, metal wire is widely used, or rather, various products made from it.
Bending a wire with the help of a manual metalwork tool with your own hands allows you to produce a fairly large number of products necessary for the household, such as:
But for this you have to use the softest and most ductile types of wire, so that you can easily bend the metal into the shape we need.
So, for working with wire up to 3 mm in diameter, round-nose pliers, pliers and a bench vise are suitable, and you can cut the wire with wire cutters or side cutters. Such a set is quite enough to give the metal wire the desired shape and its subsequent processing.
Working with large diameter wire has certain difficulties. But if it is also rigid, then to bend it manually you will need to use special bending devices.
Of course, you can buy a ready-made bending device, but it is quite possible to make a tool with your own hands. How to make a do-it-yourself device for bending wire from available parts can be seen in the photo.
In order to bend the wire into a ring and at the same time it turns out to be of the correct shape, you must either use a pre-made wooden blank of the desired diameter, or use a piece of metal pipe of a suitable diameter. We wind at least two turns on the template and make marks, while not forgetting to take an amendment for the thickness of the cut. Next, cut the wire and weld an even ring.
Search records using the filter: Select BendingProtectionForgingCuttingWeldingDrilling Select RebarSquareCircleSheetStripWirePipeAngle Channel/Beam Select AluminumBrassCopperStainless SteelTitaniumCast Iron
wikimetall.ru
There are several ways to bend the wire. The most common option is to bend such parts manually. Within the framework of industrial production, the manual method is not cost-effective and has numerous costs. In production, various types of wire bending machines are used.
Depending on the technology, several types of wire machines are distinguished:
The specified type of unit is used for serial production. Such wire bending machines have high productivity and cost-effectiveness compared to others.
The wire manufacturing process goes through several stages:
Such a bending machine is able to produce only a certain type of finished product. This is due to the presence in it of devices that are pre-configured for the manufacture of parts having a certain shape.
Units produce parts that are simple in shape and do not offer a wide variety of them. The number of bending operations on such machines is limited to five.
This device is considered more technologically advanced than the previous one. The machine carries out additional processing of the finished product, which the unit does not do from the bay.
The device allows you to make stamping and carving on wire products.
This type of machine has two main disadvantages:
Devices of this type are designed for the manufacture of round parts. The wire feed on the machine is carried out on a shaft with a predetermined radius. Feeding is carried out using guide rollers. A rotational movement of the shaft is created, resulting in the wire wrapping around the finger several times.
The device allows you to adjust the spring step and the angle of bending of the part. This is ensured by the position of the break-in rollers relative to the shaft.
This manual bending machine only makes one type of product. In order to change the type and shape of the manufactured products, a preliminary replacement of bending devices will be required. It will be necessary to perform commissioning work.
The pushing method is used for wire that needs to be shaped into a complex geometric shape.
The pushing procedure is based on the translational movement of the metal material through the roll forming machine. The given shape of the part is given by rolling rollers. Instead of the roll forming device of the machine, a spring winding device can be used.
The equipment on which wire bending is possible in this way is complex and requires special knowledge.
Progress in machine tool building made it possible to introduce CNC units, with the help of which wire bending became possible.
The machines produce 2D parts and 3D spatial products. The machines are controlled by an industrial computer. Thanks to the computer, it is possible to rotate the bending consoles in three-dimensional space in any sequence.
CNC units have high labor productivity. If it is necessary to change the form and type of products, it is enough just to change the production program on the computer.
For bending, sometimes it is enough to use improvised tools. Much depends on the thickness of the material used.
For bending products with your own hands, having a diameter of up to 3 mm, suitable:
The material is cut with side cutters or ordinary wire cutters.
Products with a large diameter will require the use of a do-it-yourself device. The assembly of the machine is carried out in stages:
A hand-made mechanism will allow you to make products of a more complex configuration.
It is one of the ways to give it a new shape using manual or mechanical action using special equipment.
The bending itself is due to the compression of the inner layer, whereby the outer layer can be stretched and folded. Such technological works are in great demand, as well as equipment for manual bending.
You can create products from bent wire with your own hands.
In this case, it is desirable to choose softer plastic materials for the process, so that the wire can easily bend, and do-it-yourself work does not create difficulties.
If the wire is rigid and has a large diameter, then for its manual processing it is necessary to use certain tools:
Before you start manually bending the material for the rings, it is better to create a certain template on paper and periodically check it during work. Simple shapes can be made without the participation of templates.
For example, to create a conventional rectangular clamp, it is enough to first clamp a part of the wire with a metal vise, and bend at a right angle on the remaining piece with pliers or a hammer.
When doing manual work on bending wire with your own hands, you should follow certain safety rules that can protect your hands from possible injuries:
Safety rules will protect your hands, but the DIY bending process itself is still quite complicated and time consuming. You can bend products manually only if you have certain experience and knowledge.
Special equipment helps to bend the wire in large volumes. Let's study it in more detail.
If we talk about bending wire on a large scale (in production or a specialized plant), then various methods are used for its plastic deformation.
One of the most common and economical is the bay processing method.
In this case, wire rings are wound on coils, and then they are fed to two-plane roller machines that align the wire.
After that, the material is processed on bending equipment (the necessary shape is created), at the end the wire is cut off, and the whole cycle of work is repeated again.
At the same time, all work is fully automated, which allows you to save time and money and use the device to create a simple curved structure with a sweep length of about 1000 mm.
For do-it-yourself wire-running, there are special devices that consist of fixed templates of certain curvature radii (the radius can be either one or several).
The material is rolled around the created template using pressure rollers.
Basically, this technology is used to create bent products that have a small bend radius (about the same as the diameter of the wire).
The method of pushing the wire is similar to the way the 3-roll equipment works on a roll forming and spring winding machine.
The material is pushed into the fixture using a special wire, then it is pressed against various rollers, which makes it possible to change the bending parameters and make transitions to different radii.
This device allows you to bend various structures that have a complex configuration and large bending radii on the reamer - from 1000 mm or more.
You can align the wire using straightening equipment or a special device. This equipment includes units consisting of rotating straightening frames or two-plane straightening blocks.
In this case, rotating frames are preferable, as they allow you to align the material more smoothly.
If only the simplest devices (vice, pliers) are used for bending wire on their own, then professional machines are put into action for mass industrial processing of the material (for example, for the production of key rings, or springs for handles).
A wire bending machine with one bending console is one of the simplest and makes it possible to create bent products of a simple shape. The length of the reamer in this case should not exceed 1000 mm.
Two-console machines can work with a reaming length of more than 1000 mm.
The material is cut into the required pieces, then it is deformed from both ends simultaneously.
Such equipment allows you to create products with a large number of bends. Machines with only one console can no longer perform this work.
Also on double-console machines, you can make figures with closed bends.
Wire bending on so-called 3D machines is becoming more and more popular these days.
It is possible to make volumetric spatial bending using a rotary bending console, which is controlled by an automated system.
Unfortunately, such processing of the material is quite expensive, so basically the parts are created using simple flat bending, and then, if necessary, automatic welding of individual parts is carried out.
But due to welding seams, products become more fragile and short-lived, so their cost is relatively budgetary.
There are several ways to bend the wire. The most common option is to bend such parts manually. Within the framework of industrial production, the manual method is not cost-effective and has numerous costs. In production, various types of wire bending machines are used.
Depending on the technology, several types of wire machines are distinguished:
The specified type of unit is used for serial production. Such wire bending machines have high productivity and cost-effectiveness compared to others.
The wire manufacturing process goes through several stages:
Similar is able to produce only a certain type of finished product. This is due to the presence in it of devices that are pre-configured for the manufacture of parts having a certain shape.
Units produce parts that are simple in shape and do not offer a wide variety of them. The number of bending operations on such machines is limited to five.
This device is considered more technologically advanced than the previous one. The machine carries out additional processing of the finished product, which the unit does not do from the bay.
The device allows you to make stamping and carving on wire products.
This type of machine has two main disadvantages:
Devices of this type are designed for the manufacture of round parts. The wire feed on the machine is carried out on a shaft with a predetermined radius. Feeding is carried out using guide rollers. A rotational movement of the shaft is created, resulting in the wire wrapping around the finger several times.
The device allows you to adjust the spring step and the angle of bending of the part. This is ensured by the position of the break-in rollers relative to the shaft.
This manual bending machine only makes one type of product. In order to change the type and shape of the manufactured products, a preliminary replacement of bending devices will be required. It will be necessary to perform commissioning work.
The pushing method is used for wire that needs to be shaped into a complex geometric shape.
The pushing procedure is based on the translational movement of the metal material through the roll forming machine. The given shape of the part is given by rolling rollers. Instead of the roll forming device of the machine, a spring winding device can be used.
The equipment on which wire bending is possible in this way is complex and requires special knowledge.
Progress in machine tool building made it possible to introduce CNC units, with the help of which wire bending became possible.
The machines produce 2D parts and 3D spatial products. The machines are controlled by an industrial computer. Thanks to the computer, it is possible to rotate the bending consoles in three-dimensional space in any sequence.
CNC units have high labor productivity. If you need to change the shape and type of products, you just need to change them on the computer.
For bending, sometimes it is enough to use improvised tools. Much depends on the thickness of the material used.
For bending products with your own hands, having a diameter of up to 3 mm, suitable:
The material is cut with side cutters or ordinary wire cutters.
Products with a large diameter will require the use of a do-it-yourself device. The assembly of the machine is carried out in stages:
A hand-made mechanism will allow you to make products of a more complex configuration.
Objects of various configurations and purposes can be made from wire. During operation, it is important to bend the material correctly, therefore, with a metal thread diameter of more than 1 mm, it is advisable to use special devices.
The main types of this type of tool, as well as how to make a wire bending machine with your own hands, will be discussed in this article.
If it is necessary to perform a small amount of work, then manual devices are used to bend the wire. For bending soft metal material or when the wire diameter does not exceed 3 mm, pliers or round nose pliers are used. These tools allow you to securely clamp a part of the product in one tool, and with the help of another, bend the wire to the desired angle.
Thus, it is possible to bend the material with the help of a carpentry vice. In this case, the wire is fixed in a vertical position, and the change of direction is also carried out using pliers or any other clamping device or mechanism.
If you need to make a rounded bend, then for this purpose any rod of suitable diameter is used, which is also clamped in a vice. A rounded bend will need to be made during the independent manufacture of springs from elastic wire.
To do this, it is enough to clamp a rod or pipe of a suitable diameter in a vice, fix the end of the wire on one side, and use pliers to wind the wire to the required number of turns.
If the wire has to be bent too often, then the most appropriate solution would be to purchase special fixtures or machines.
Tools for bending this material are a design in which the clamping of the wire and its bending is carried out due to the muscular strength of a person. Machine tools usually use electric drives, and for the manufacture of complex products, such machines are equipped with electronic controls.
Wire bending is not a difficult process, but to work effectively with this material, you must adhere to the following rules:
The implementation of these recommendations will prevent marriage and injury in the event of a sudden release of material from the restraint. You should also take care of the wiring and proper grounding when using machines powered by electricity.
If the amount of work is large enough, then equipment equipped with an electric motor will allow a large number of operations to be performed. The use of machines will greatly increase labor productivity, but at the initial stage, it will take some effort to study the process of the wire bending machine.
The most economical machine for bending wire is bay equipment, in which the material is fed from bulk coils.
The process of bending wire on such equipment is carried out in the following order:
To make the work of bending the wire as comfortable as possible, CNC machines are used.
Despite the significant cost of such equipment, the return on investment in the business is made within a few months. Machines equipped with a microprocessor allow not only to fully automate the process, but also to perform welding of curved products.
If the wire bending device will be used only for homework, then you can make a manual machine yourself. Do-it-yourself equipment will not be highly productive, but such a product will be quite enough to perform daily operations in a small volume.
For a homemade machine, you will need to prepare the following materials:
Also, to perform this work, you will need to prepare the tools:
A do-it-yourself device for bending wire is made in the following sequence:
Wire bending is carried out as follows:
If the home-made machine was made of high-quality materials, and the welds were made at a professional level, then the device can be used not only for wire processing. In this case, it is possible to use the product for bending pipes, including profile pipes, with a diameter of up to 10 mm.
Watch a video where a person shows how to assemble a simple design of a rebar bender for bending bars and a square: