Energomera ce 101 circuit diagram. Electric meter installation

Energy meters are widely used by professionals and installed in buildings for various purposes. These devices have high-quality current-carrying networks, clamping terminals and a reliable housing. There are different models of meters on the market: both single-phase and multi-phase with different tariffs.

Electric meter Energomer CE 102: instruction manual

The electric meter Energomen CE 102 is a single-phase multi-tariff system. It allows you to take readings at night and day rates. Consumption information is indicated on the instrument panel.

The meter readings are recorded up to a dot or comma.

CE-102 series counters are available in several execution configurations. Models differ by body type and are distinguished: S6, S7, R5 and R8. In numbers, the name of the models is distributed as 145, 245, 148, 248.

Reading options:

1. When using the automatic mode, all data are displayed on the display sequentially or with a small interval.
2. In manual mode, you will need to use a special control button. Depending on the device model, the system may have a SHOT or PRSM button.

For greater convenience in the counters of this series, all data are divided into groups. Each of them contains its own data. The transition between groups is carried out by a delay when pressing the test button, and with a short press, you can check the indicators within the group.

Features of the electric meter Energomer TsE6803V: characteristic

The Energomer TsE6803V model has only minor differences from other options. But there are certain features of the design and execution of the device. Data accounting occurs by multiplying the voltage and the input force, creating impulses. The pulse frequency will be matched to the input power. Pulses are summed up using a microprocessor or an electromechanical counter. It is these data that are shown on the scoreboard.

There are certain design differences in the TsE6803V model. In this way, the device can be connected to test instruments via the terminal box. To do this, insert separate terminals. Also, this model has a memory that does not depend on the supply of electricity.

In the event of a power outage, the meter display will display the necessary consumption data, time and date.

There are 2 indicators on the front of the case. The first indicator "Network" lights up green when connected to the mains. Otherwise, the load indicator starts flashing. In this case, it is necessary to determine the cause of the breakdown, but it is better to immediately send the meter for repair.

Technical characteristics of the Energomer TsE6803V meter:

• The frequency of changes in the network is 50-60 Hz;
• First or second class of accuracy;
• The mechanism complies with the state standard;
• The mechanism will last 30 years.

Verification of the device is carried out immediately after its manufacture, after repair work and every 16 years during operation. On average, the meter can operate uninterruptedly for 30 years. Due to its low cost, the TsE6803V model is popular among consumers. The device comes with a 4 year warranty.

Characteristics of the electricity meter Energomer CE 101

Energy meter CE 101 is a single-tariff and single-phase device. It is used to measure current activity in single phase circuits. The shunt acts as a current sensor. The device is mounted on a TN-35 rail.

Technical features of the CE 101 device:

• Requires little energy for its own work;
• The design has a standard and optical output;
• The presence of a light indicator;
• Increased measures of protection against theft;
• The current is measured using a shunt;
• The presence of an adder of a mechanical or electronic type;
• Stability of a design to adverse conditions.

This device is capable of operating 160,000 hours to failure. Every 16 years, the device is tested for performance. In general, the counter will last 30 years. The manufacturer provides a 5 year warranty. The device has the first class of accuracy. The mains frequency is 50 Hz and the base voltage is 230 W. Main and maximum current- 5 and 10 A, respectively.

Energomer counter tse68038: how to take readings from the device

Model tse68038 refers to three-phase meters. This is a one-way design. Readings are taken from the electromechanical scoreboard. Types of housings in the meter may vary. This is how the 6th and 7th digits for the scoreboard are distinguished. In addition, the panel is divided into electronic and mechanical.

To take readings from the counter, you need to pay attention to the scoreboard. The last digit must be framed with a box or a comma. It is not taken into account when deriving indicators.

To determine the amount of energy consumption per month, you need to subtract the number of kilowatts for the last month from the current result.

If there is no designation of the extreme figure, then all numbers on the scoreboard are taken into account. On electronic models, a dot is used instead of a comma. We write down all the numbers up to the point.

The sequence of connecting the counter TsE6803V direct connection

After purchasing the meter, you must properly mount it. The installation process has no particular difficulties. The connection can be made in several ways, depending on the electrical installation.

Three-phase meter connection options:

• Direct connection;
• By means of current transformers;
• With the help of transformer devices and instrument transformers.

All options differ only in the presence of transformer indicators. For the home, a direct connection scheme is usually used. These models have current limits - 100 A.

There are 8 contacts in the terminal block. There are certain differences in the number of phases. To connect the device to a four-wire network, remember that an introductory mechanism is installed in front of the meter. After the meter, power is supplied by group single-pole circuit breakers. This option is suitable for a summer residence or a country house.

What is an Energomer counter (video)

Energomer's electric meter is highly reliable. It is not so easy to wind up readings from models. For correct installation and operation, a special instruction is used, indicated in the device passport. The connection process itself is not difficult.

⁠ Energy meter Energomer CE 101 S6 (100A) with remote control

Our online store offers to buy a "charged" meter with Energomer CE101 remote control. This single-tariff single-phase electric meter has been improved to completely or partially turn off electricity metering.

The remote control has 4 main modes (standard, 100%, 75% and 25% undercount) and additionally you can manually set the required percentage. Our refinement of the counter is to install a small board in the internal mechanism of the device. It is this microcircuit that gives a signal when you need to turn on one or another mode. This microcircuit cannot be detected by ordinary checks, only if the device is disassembled. Ordering a meter with a remote control from us is also beneficial because we give a guarantee for each device - 1 year. Before sale, each device undergoes a performance test.

The principle of operation of a single-phase electric meter Energomera CE101 S6 145 M6.

It lies in the fact that the incoming current and voltage indicators are multiplied according to the sigma-delta modulation method and then converted into a pulse system that is proportional to the input power. The received pulses with the help of a microcontroller go through the stage of summation and identification of active electrical energy consumption indicators. And finally, data measured in kW / h are displayed on the dial of the electromechanical device.

The main features of the energy meter Energomer CE-101:
- release of the counter is carried out strictly according to GOST of Russia 52320-2005 and according to GOST of Russia 52320-2005;
- this model has passed the certification and standardization procedures for measuring instruments and is included in the State Register of Measuring Instruments of the Russian Federation;
- minimum power consumption of the meter itself;
- reinforced terminal group, due to which the meter is able to record current up to 100 Amperes;
- LED indicator signaling the operation of the device;
- the presence of a shunt as a current meter;
- meets the requirements for climatic and mechanical influences;
- calibration interval - 16 years;
- manufacturer's warranty - 5 years from the date of issue of the device.

It is possible to buy an energy meter Energomera CE 101 S6 with a remote control at the specified phone number: 8-920-01-02-111. If you have any questions about metering devices, please contact us and we will answer them. We also have free delivery by courier, who can connect the meter and demonstrate its operation.

The price of the Energomer CE 101 electric meter with a remote control is 6,000 rubles for the entire set.

⁠ ⁠
Technical parameters of the energy meter Energomer CE 101 S6

⁠
Wiring diagram of the energy meter Energomer CE 101 S6

Most often used to account for electricity in everyday life. So to speak, the flagships among the counters, it’s only a pity that in quantity, and not in quality. The warranty for the Energomer CE 101 counter is longer than that of Mercury and is 5 years. The price of the Energomer CE 101 counter is approximately 600-800 rubles.

Counter Energomera CE 101 has three types of execution: for mounting holes from CE101-S10 induction meters, just fasteners on the wall of the CE101-S6 shield and mounting on the CE101 R5 DIN rail, which we will consider in detail in this article.

Energy meter CE 101 R5

This meter is used to measure electricity in apartments and private houses. In a single-phase power supply for 230 V and is rated for a maximum current of 60 A.

The Energomer CE 101 meter is included in the State Register of Measuring Instruments of the Russian Federation and can legally be used for electricity metering.

It has a relatively small size and occupies 5 modules on a DIN rail in .

The standard package includes a meter, an operating manual and a form for the Energomera CE 101 meter. Be sure to keep the receipt for the purchase of the meter, it is for it that in case of a meter malfunction you can return it to the store under warranty.

The Energomera CE 101 meter does not have a passport, but only a form that contains information about the meter. Check that the serial number in the form and on the meter panel matches, the date of verification of the meter is also indicated, which you should also pay attention to so that you do not get a meter more than two years old, otherwise you will have to re-verify it before installation.

The operating manual for the meter CE 101 indicates the types of execution (installation) of the meter, parameters, connection diagrams of the meter, depending on the version.

But the connection diagram of the meter, exactly the one you are installing, can always be seen on the terminal cover of the meter

Energomer CE 101 meter operation manual can be downloaded .

In terms of configuration, I liked it more counter Mercury 201 , which has an adapter plate for fasteners instead of induction meters, i.e. they are more versatile and, if necessary, Mercury can be installed both on a DIN rail and on a plate.

But we must pay tribute to Energomera, they also recently began to produce universal meters, with installation, both on a DIN rail and in place of induction CE 101 R5.1, but the price is really higher.

The accuracy class of the Energomer CE 101 meter is 1. I remind you that this is the maximum meter error, expressed as a percentage, i.e. error Energy meters CE 101 in the range from -1% to +1%, which meets the requirements of the legislation of the Russian Federation in terms of electricity metering.

If there is voltage at the meter terminals, the red indicator lights up, signaling that the meter is energized.

The counting mechanism of the Energomer CE 101 meter has 6 drums with numbers, the rightmost drum is tenths of a kWh, so they do not need to be taken into account when taking meter readings.

A hologram protects against forgery and from opening the meter case.

The seal on the screw of the meter case also indicates the integrity of the meter case, and more importantly, it indicates the meter verification period. Our counter is the third quarter of 2014.

On this, I will probably finish the review of the Energomer CE 101 counter.

Thank you for your attention.