Energomera CE 101 circuit diagram. Electric meter installation

Energomer meters are widely used by professionals and installed in buildings for various purposes. These devices have high-quality conductive networks, clamp terminals and a reliable housing. There are different models of meters on the market: both single-phase and multi-phase with different tariffs.

Electric meter Energomera CE 102: operating instructions

The electric meter Energomen CE 102 is a single-phase multi-tariff system. It allows you to take readings at night and day rates. Information about consumption is indicated on the device display.

Counter readings are recorded before the dot or comma.

CE-102 series meters are available in several configurations. The models differ in the type of case and are distinguished: S6, S7, R5 and R8. In numbers, the model names are distributed as 145, 245, 148, 248.

Reading options:

1. When using the automatic mode, all data is displayed on the display sequentially or at short intervals.
2. In manual mode, you will need to use a special control button. Depending on the device model, the system may have a FRAME or PRSM button.

For greater convenience, in meters of this series, all data is divided into groups. Each of them contains its own data. The transition between groups is carried out by a delay when pressing the checking button, and with a short press you can check the indicators within the group.

Features of the Energomer TsE6803V electricity meter: characteristics

The Energomer TsE6803V model has only minor differences from other options. But there are certain features of the design and execution of the device. Data is taken into account by multiplying voltage and input force, creating pulses. The pulse frequency will be matched to the input power. The pulses are summed using a microprocessor or an electromechanical counter. It is this data that is shown on the meter display.

There are certain design differences in the TsE6803V model. This way the device can be connected to test devices via a terminal box. To do this, separate terminals are inserted. Also, this model has a memory that does not depend on the power supply.

When there is a power outage, the meter display will display the necessary consumption data, time and date.

There are 2 indicators on the front of the case. The first indicator “Network” lights up green when connected to the mains. Otherwise, the load indicator starts blinking. In this case, it is necessary to determine the cause of the breakdown, but it is better to immediately send the meter for repair.

Technical characteristics of the Energomer TsE6803V counter:

• The frequency of changes in the network is 50-60 Hz;
• First or second accuracy class;
• The mechanism complies with the state standard;
• The mechanism will last 30 years.

The device is checked immediately after its manufacture, after repair work and every 16 years during operation. On average, the meter can operate uninterruptedly for 30 years. Due to its low cost, the TsE6803V model is popular among consumers. The device comes with a 4-year warranty.

Characteristics of the energy meter Energomera CE 101

The Energomer CE 101 meter is a single-tariff and single-phase device. It is used to measure current activity in single phase circuits. The current sensor is a shunt. The device is mounted on a TN-35 rail.

Technical features of the CE 101 device:

• Requires little energy for its own work;
• The design has standard and optical output;
• Availability of indicator light;
• Increased theft protection measures;
• The current is measured using a shunt;
• Availability of a mechanical or electronic type adder;
• Resistance of the structure to adverse conditions.

This device is capable of operating for 160,000 hours without failure. Every 16 years the device is tested for functionality. In general, the meter will last 30 years. The manufacturer provides a 5-year warranty. The device has first class accuracy. The network frequency is 50 Hz and the base voltage is 230 W. Main and highest current– 5 and 10 A respectively.

Energy meter tse68038: how to take readings from the device

Model TsE68038 refers to three-phase meters. This is a single tariff design. Readings are taken from the electromechanical display. The types of housings in the meter may differ. This is how 6th and 7th digits for the scoreboard are distinguished. In addition, the panel is divided into electronic and mechanical.

To take readings from the meter, you need to pay attention to the display. The last number must be surrounded by a frame or comma. It is not taken into account when taking indicators.

To determine the amount of energy consumption for a month, it is necessary to subtract the number of kilowatts for the last month from the current result.

If there is no indication of the last number, then all numbers on the scoreboard are taken into account. On electronic models, a dot is used instead of a comma. We write down all the numbers up to the point.

Connection sequence for the TsE6803V direct connection meter

After purchasing a metering device, you must install it correctly. The installation process is not particularly difficult. The connection can be made in several ways depending on the electrical installation.

Options for connecting a three-phase meter:

• Direct connection;
• Through current transformers;
• Using transformer devices and instrument transformers.

All options differ only in the presence of transformer indicators. For the home, a direct connection scheme is usually used. These models have current limitations of 100 A.

The terminal block contains 8 contacts. There are certain differences in the number of phases. To connect the device to a four-wire network, you should remember that an input mechanism is installed in front of the meter. After the meter, power is supplied through group single-pole circuit breakers. This option is suitable for a cottage or country house.

What is an Energomer counter (video)

The Energomera electricity meter is highly reliable. It is not so easy to extract readings from models. For correct installation and operation, special instructions are used, indicated in the device passport. The connection process itself is not difficult.

⁠ Electricity meter Energomera CE 101 S6 (100A) with remote control

Our online store offers to buy a “charged” meter with an Energomer CE101 remote control. This single-tariff, single-phase electric meter has been improved to completely or partially disable electricity metering.

The remote control has 4 main modes (standard, 100%, 75% and 25% undercounting) and you can additionally manually set the required percentage. Our modification to the counter consists of installing a small board into the internal mechanism of the device. It is this microcircuit that gives a signal when one mode or another needs to be turned on. This microcircuit cannot be detected by ordinary tests, only if the device is disassembled. It is profitable to order a meter with a remote control from us because we provide a 1-year warranty on each device. Before sale, each device is tested for functionality.

The operating principle of the single-phase electric meter Energomera CE101 S6 145 M6.

It consists in the fact that the incoming current and voltage indicators are multiplied using the sigma-delta modulation method and then converted into a pulse system that is proportional to the input power. The received pulses, using a microcontroller, go through the stage of summing and identifying indicators of active electrical energy consumption. And finally, data measured in kW/hour is displayed on the dial of the electromechanical device.

Main features of the energy meter Energomer SE-101:
- the meter is released strictly in accordance with Russian GOST 52320-2005 and Russian GOST 52320-2005;
- this model has passed certification and standardization procedures regarding measuring instruments and is included in the State Register of Measuring Instruments of the Russian Federation;
- minimal energy consumption of the meter itself;
- reinforced terminal group, due to which the meter is capable of recording current up to 100 Amperes;
- LED indicator signaling the operation of the device;
- the presence of a shunt as a current meter;
- meets the requirements for climatic and mechanical influences;
- verification interval - 16 years;
- manufacturer's warranty - 5 years from the date of manufacture of the device.

You can buy an energy meter Energomera CE 101 S6 with a remote control by calling the specified phone number: 8-920-01-02-111. If you have questions on the topic of metering devices, please contact us and we will answer them. We also offer free delivery by courier, who can connect the meter and demonstrate its operation.

The price of the Energomer CE 101 electric meter with remote control is 6,000 rubles for the entire set.

⁠ ⁠
Technical parameters of the electricity meter Energomera CE 101 S6

⁠
Connection diagram for the electric meter Energomer CE 101 S6

Most often used for metering electricity at home. So to speak, they are the flagships among counters, but it’s a pity that they are in quantity and not in quality. The warranty on the Energomer CE 101 meter is longer than that of Mercury and is 5 years. The price of the Energomer CE 101 meter is approximately 600-800 rubles.

Counter Energy meter CE 101 has three types of execution: for fastening holes from induction meters CE101-S10, just fastening to the wall of the CE101-S6 panel and mounting on a CE101 R5 DIN rail, which we will consider in detail in this article.

Energy counter CE 101 R5

This meter is used to account for electricity in apartments and private houses. In a single-phase power supply at 230 V and designed for a maximum current of 60 A.

The Energomer CE 101 meter is included in the State Register of Measuring Instruments of the Russian Federation and can be legally used for electricity metering.

It is relatively small in size and occupies 5 modules on a DIN rail in .

The standard package includes a meter, an operating manual and a form for the Energomer CE 101 meter. Be sure to keep the receipt for the purchase of the meter, so that if the meter malfunctions, you can return it to the store under warranty.

The Energomera CE 101 meter does not have a passport, but only a form that contains information about the meter. Make sure that the serial number in the form and on the meter panel match, the date of verification of the meter is also indicated, which you should also pay attention to so that you are not sold a meter that is more than two years old, otherwise you will have to re-verify it before installation.

The operating instructions for the CE 101 meter indicate the types of design (installation) of the meter, parameters, and connection diagrams of the meter depending on the design.

But the connection diagram for the meter, exactly the one you are installing, can always be seen on the terminal cover of the meter

The operating manual for the Energomer CE 101 meter can be downloaded .

In terms of configuration, I liked it better counter Mercury 201 , which has an adapter plate for fasteners instead of induction meters, i.e. they are more universal and, if necessary, Mercury can be installed both on a DIN rail and on a plate.

But we must pay tribute to Energomera, they recently also began to produce universal meters, with installation both on a DIN rail and in place of induction CE 101 R5.1, but the price is actually higher.

The accuracy class of the Energomer CE 101 meter is 1. Let me remind you that this is the maximum error of the meter, expressed as a percentage, i.e. The error of the Energy Meter CE 101 ranges from -1% to +1%, which complies with the requirements of the legislation of the Russian Federation regarding electricity metering.

If there is voltage at the meter terminals, the red indicator lights up, indicating that the meter is energized.

The counting mechanism of the Energomer CE 101 meter has 6 drums with numbers, the rightmost drum is tenths of a kW*hour, so they do not need to be taken into account when taking meter readings.

A hologram protects against counterfeiting and opening the meter case.

The seal on the screw of the meter body also indicates the integrity of the meter body, and more importantly, it indicates the period for verification of the meter. Our counter shows the third quarter of 2014.

This is where I’ll probably finish my review of the Energomer CE 101 meter.

Thank you for your attention.